Primesealer Water Based Walpro Sparkle
Primesealer Water Based Walpro Sparkle
is develop to use as primary coat to seal and enhance durability of finishing paint. It is free from pollution, solvent lead, toxic, and noxious. It also contains effective additives which protect from fungus for many years.
PACK SIZE
Quarter – 0.91 lts. / Gallon – 3.65lts. /Drum – 14.6 lts.
COLOR RANGE
White only
FILM PROPERTIES
Not suitable where the surface is saturated
COMPOSITION (NOMINAL) Light fastness non lead pigments
Binder:
Acrylic Copolymer Emulsion
Solvent:
Water
VOLUME SOLIDS
White 50% (nominal),
DRYING TIME
Touch Dry: Dependent of humidity and temperature.
Recoat:
2 – 3 hrs
PRACTICAL COVERAGE
150 sqft. / lts. per coat
APPLICATION
Brush / Roller
THINNING
Brush / Roller:
For sealing new or bare surface thin with up to 2 parts of clean water to 4 parts of paint (50%).
For normal use thinning should not exceed 2-3 parts of clean water to 4 parts of paints (50 – 70%)
CLEANING UP
Clean all equipment with clean water immediately after use.
SURFACE PREPARATION
Allow all new surfaces to dry out completely. Remove all loose or defective paint or powdery residues through brushing and scraping using a stiff brush. Where appropriate the surface should be rubbed down using a suitable abrasive paper and dust off.
FILLING NEW SURFACES
After priming new surface with Kings Prime Sealer Water Based fill any imperfections with Acrylic Wall Putty allow the filler to dry overnight before painting.
SYSTEM INFORMATION
Powdery Surfaces:
Primer (1 Coat),
Putty (2-3 Coats)
Finish (2 – 3 coats) of any
Oil Based or Water Based Paint
Normal, Sound Surfaces: (previously panted).
No Primer required
SAFETY, HEALTH AND
ENVIRONMENT INFORMATION
Keep out of reach of children. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. Repeated exposure may cause skin dryness or cracking. Wear suitable gloves. When apply paint it is advisable to wear eye protection. In case pf contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation.
Inside always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful, may cause lungs damage if swallowed. Do not breathe vapor or sanding dust. Toxic by inhalation if swallowed. If inhalation cause physical discomfort move to fresh air. If discomfort persists or any breathing difficulty occurs seek medical advice.
Protect from extremes of temperature. Store in cool and dry place. Do not store by hanging on a hook. In the event of an accident contain and collect spillage using sand or earth. Very toxic to aquatic organisms. Do not empty into drains or appropriate environment quality regulation.