PRODUCT CATEGORIES – 6

SURFACE PREPARATION

Allow all new surfaces to dry out completely. Remove all loose or defective paint or powdery residues through brushing and scraping using a stiff brush. Where appropriate the surface should be rubbed down using a suitable abrasive paper and dust off.

FILLING NEW SURFACES

After priming new surface with Kings Prime Sealer Water Based fill any imperfections with Acrylic Wall Putty allow the filler to dry overnight before painting.

SYSTEM INFORMATION

Powdery Surfaces:

Primer (1 Coat),

Putty (2-3 Coats)

Finish (2 – 3 coats) of any

Oil Based or Water Based paint

Normal, Sound Surfaces: (previously panted).

No Primer required

Basefill can be used if required.

SAFETY, HEALTH AND

ENVIRONMENT INFORMATION

Keep out of reach of children. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. Repeated exposure may cause skin dryness or cracking. Wear suitable gloves. When apply paint it is advisable to wear eye protection. In case pf contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation.

Inside always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful, may cause lungs damage if swallowed. Do not breathe vapor or sanding dust. Toxic by inhalation if swallowed. If inhalation cause physical discomfort move to fresh air. If discomfort persists or any breathing difficulty occurs seek medical advice.

Protect from extremes of temperature. Store in cool and dry place. Do not store by hanging on a hook. In the event of an accident contain and collect spillage using sand or earth. Very toxic to aquatic organisms. Do not empty into drains or appropriate environment quality regulation.