Oil Matt Dawnlac Dynamic
Oil Matt Dawnlac Dynamic
is oil based matt finish paint that provides a durable, washable and fade-resistance. Dawnlac Dynamic is suitable for use on all type of interior and exterior wood, metal and masonry surfaces, providing a decorative and uniform flat smooth finish with excellent hiding
PACK SIZE
Quarter – 0.91 lts. / Gallon – 3.65lts. /Drum – 14.6 lts.
COLOR RANGE
As per Shade Card
FILM PROPERTIES
Chemical Resistance
Resistance to mild chemical fume attack but where there is heavy attack e.g. – Actual contact with chemical special paint system may be required.
Heat Resistance
Generally resistance to heat up to 90°C, but some discoloration of light color may occur at temperature above 80°C.
Water Resistance
Resistant to the levels of atmosphere humidity present in normal interior and exterior environments and will withstand repeated washing. Not suitable for use on immersed surfaces.
COMPOSITION (NOMINAL)
Light fastness non lead pigments
Binder: long oil alkyd
Solvent: MTT (Mineral Turpentine)
VOLUME SOLIDS
White 40% (nominal), other color will vary
DRYING TIME
Single coat at standard film thickness.
Touch Dry:
3- 4 hrs
Recoat:
16 hrs
PRACTICAL COVERAGE
150sqft. / lts. per coat
APPLICATION
Brush / Roller / Spray
THINNING
Brush / Roller:
Add up to 0.5 part of mineral turpentine to 4 parts of paints (10 – 12 % )
Conventional Spray:
Add up to 1 part Mineral Turpentine to 4 parts of paints (20 – 25 %)
CLEANING UP
Clean all equipment with Mineral Turpentine immediately after use.
SURFACE PREPARATION
Surface generally must be clean, dry, free from all defective or poorly adhering material, dirt, and grease, wax etc. previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.
Steel surfaces should be manually prepared by power of hand tool to BS7079 part A1: 1989 st3.
For optimum performance new galvanized and aluminum surfaces should be cleaned and degreased, then pre-treat with a pre-treatment primer to ensure good adhesion.
SYSTEM INFORMATION
Wood:
Primer Oil Base (1 Coat),
Metal:
Redoxide Primer (1-2 Coat),
Masonry:
Primer Oil Base (1 Coat),
Oil Matt (2-3 Coats)
SAFETY, HEALTH AND
FLAMMABLE:
ENVIRONMENT INFORMATION
In case of fire use foam, dry powder, AAAF, CO2 fire extinguisher. Never use water. Keep away from sources of ignition. No smoking. Keep container tightly closed and upright to prevent leakage when not in use. Keep out of reach of children. Keep away from combustible material. CONTAINS MINIRAL TURPENTINE. Work only in areas of good ventilation. Inside always keep doors and windows fully open during application and drying. Do not use on large surface areas inside or small confined spaces. IF THIS PRODUCT IS USED BY PROFESSIONAL OPERATORS it may be applied on large surfaces inside or used in small confined spaces, provided air supplied breathing apparatus is used. When applying for short periods only or rubbing down, a suitable cartridge mask should be worn provided the filter is changed regularly.