Primesealer Oil Based Shinning Arrow
Primesealer Oil Based Shinning Arrow
is solvent based sealer based for interior and exterior masonry surfaces for both new and previously decorated suck as brickwork, plaster and cement.
PACK SIZE
Quarter – 0.91 lts. / Gallon – 3.65lts. /Drum – 14.6 lts.
COLOR RANGE
Only white
FILM PROPERTIES
Chemical Resistance
Resistance to mild chemical fume attack but where there is heavy attack e.g. – Actual contact with chemical special paint system may be required. Heat Resistance
Generally resistance to heat up to 90°C, but some discoloration of light color may occur at temperature above 80°C.
Water Resistance
Resistant to the levels of atmosphere humidity present in normal interior and exterior environments and will withstand repeated washing. Not suitable for use on immersed surfaces.
COMPOSITION (NOMINAL)
Light fastness non lead pigments
Binder: long oil alkyd
Solvent: MTT (Mineral turpentine)
VOLUME SOLIDS
White 50% (nominal), other color will vary
DRYING TIME
Single coat at standard film thickness.
Touch Dry:
3- 4 hrs
Recoat:16 hrs
PRACTICAL COVERAGE
150sqft. / lts. per coat
APPLICATION
Brush / Roller / Spray
THINNING
Brush / Roller
Add up to 0.5 part of mineral turpentine to 4 parts of paints (10 – 12 % )
Conventional spray
Add up to 1 part Mineral Turpentine to 4 parts of paints (20 – 25 %)
CLEANING UP
Clean all equipment with Mineral Turpentine immediately after
CLEANING UP
Clean all equipment with clean water immediately after use.
SURFACE PREPARATION
Allow all new surfaces to dry out completely. Remove all loose or defective paint or powdery residues through brushing and scraping using a stiff brush. Where appropriate the surface should be rubbed down using a suitable abrasive paper and dust off.
FILLING NEW SURFACES
After priming new surface with Kings Prime Sealer Water Based fill any imperfections with Acrylic Wall Putty allow the filler to dry overnight before painting.
SYSTEM INFORMATION
Powdery Surfaces:
Primer (1 Coat),
Putty (2-3 Coats)
Finish (2 – 3 coats)
Premier Emulsion (Emerald)
Normal, Sound Surfaces: (previously painted).
No Primer required
SAFETY, HEALTH AND
ENVIRONMENT INFORMATION
Keep out of reach of children. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. Repeated exposure may cause skin dryness or cracking. Wear suitable gloves. When apply paint it is advisable to wear eye protection. In case pf contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation.
Inside always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful, may cause lungs damage if swallowed. Do not breathe vapor or sanding dust. Toxic by inhalation if swallowed. If inhalation cause physical discomfort move to fresh air. If discomfort persists or any breathing difficulty occurs seek medical advice.
Protect from extremes of temperature. Store in cool and dry place. Do not store by hanging on a hook. In the event of an accident contain and collect spillage using sand or earth. Very toxic to aquatic organisms. Do not empty into drains or appropriate environment quality regulation.