Description
PACK SIZE
-
Quarter: 0.91 Lts.
-
Gallon: 3.65 Lts.
-
Drum: 14.6 Lts.
COLOR RANGE
-
As per Shade Card
FILM PROPERTIES
Chemical Resistance
-
Resistant to mild chemical fume attack
-
Not suitable for heavy chemical exposure or direct contact
-
Special paint systems may be required for severe chemical environments
Heat Resistance
-
Generally resistant to heat up to 90°C
-
Discoloration of light colours may occur above 80°C
Water Resistance
-
Resistant to normal atmospheric humidity in interior and exterior environments
-
Withstands repeated washing
-
Not suitable for immersed surfaces
COMPOSITION (NOMINAL)
-
Light fast non-lead pigments
-
Binder: Long oil alkyd
-
Solvent: Mineral Turpentine (MTT)
VOLUME SOLIDS
-
White: 30% (nominal)
-
Other colours may vary
DRYING TIME
-
Single coat at standard film thickness
-
Touch Dry: 3–4 hours
-
Recoat: 16 hours
PRACTICAL COVERAGE
-
Approx. 150 sq. ft. per litre per coat
APPLICATION
-
Brush
-
Roller
-
Spray
THINNING
Brush / Roller
-
Add up to 0.5 part mineral turpentine to 4 parts paint (10–12%)
Conventional Spray
-
Add up to 1 part mineral turpentine to 4 parts paint (20–25%)
CLEANING UP
-
Clean all equipment with mineral turpentine immediately after use
SURFACE PREPARATION
-
Surfaces must be clean, dry, and free from defective or poorly adhering material, dirt, grease, wax, etc.
-
Previously painted surfaces:
-
Rub down thoroughly using suitable abrasive paper
-
Remove all dust
-
-
Steel surfaces:
-
Prepare manually using power or hand tools to BS7079 Part A1:1989 (St3)
-
-
New galvanized and aluminium surfaces:
-
Clean and degrease thoroughly
-
Pre-treat with a suitable primer for good adhesion
-
SYSTEM INFORMATION
-
Wood: Primer OB – 1 coat
-
Metal: Red Oxide Primer – 1–2 coats
-
Masonry: Primer OB – 1 coat
-
Finish: 2–3 coats Gloss Enamel
SAFETY, HEALTH & FLAMMABLE INFORMATION
-
In case of fire, use:
-
Foam
-
Dry powder
-
AAAF
-
CO₂ fire extinguisher
-
-
Never use water
-
Keep away from sources of ignition
-
No smoking
-
Keep container tightly closed and upright when not in use
-
Keep out of reach of children
-
Keep away from combustible materials
-
Contains mineral turpentine
VENTILATION & USE
-
Work only in well-ventilated areas
-
Keep doors and windows fully open during application and drying
-
Do not use on large interior surfaces or in small confined spaces
PROFESSIONAL USE
-
Professional operators may apply on large interior surfaces or confined spaces only with air-supplied breathing apparatus
-
For short-duration application or sanding:
-
Wear a suitable cartridge mask
-
Replace filters regularly
-
-
Do not breathe vapours or sanding dust
