Description
PACK SIZE
-
Part (A): 3 Litre
-
Part (B): 1 Litre
COLOR RANGE
-
As per requirement
PRODUCT DESCRIPTION
-
Two-component polyamine cured phenolic/novolac epoxy coating
-
Heat resistant up to 205 °C (401 °F)
-
Can be applied on hot substrates up to 150 °C (302 °F)
-
Suitable for cryogenic temperatures down to -196 °C (-321 °F)
-
Can be used on insulated and non-insulated surfaces
-
Can be used as primer, mid coat, or finish coat (bright aluminum colour only as finish coat)
-
Suitable for properly prepared carbon steel, galvanised steel, stainless steel, and aluminium substrates
FILM PROPERTIES
Heat Resistance
-
Generally resistant to heat up to 205 °C
THICKNESS PER COAT
-
Dry film thickness: 100–200 µm
-
Wet film thickness: 160–320 µm
-
Theoretical spreading rate: 6.3–3.2 m²/L per coat
SURFACE PREPARATION
-
Surfaces must be clean, dry, and free from contamination to ensure lasting adhesion
DRYING TIME
-
Single coat at standard film thickness
-
Touch Dry: 2–4 hours
-
Recoat: 10 hours
COLOUR VARIATIONS
-
Products primarily meant as primers or antifoulings may have slight colour variations between batches
-
Epoxy-based finish coats may chalk when exposed to sunlight and weathering
-
Colour and gloss retention may vary depending on:
-
Type of colour
-
Exposure environment (temperature, UV intensity)
-
Application quality
-
Generic type of paint
-
-
Contact local Kings Paints office for further information
PRODUCT COMPATIBILITY
-
Various primers and topcoats can be used depending on actual exposure conditions
-
Consult technical documentation for suitable combinations
CAUTION
-
For professional use only
-
Applicators and operators must be trained and experienced
-
Must have capability and equipment to mix, stir, and apply coatings correctly
-
Use appropriate personal protective equipment (PPE)
-
Any deviations from guidelines must be approved by a Jotun representative before work commences
SAFETY, HEALTH & FLAMMABLE INFORMATION
-
Observe precautionary notices on the container
-
Use under well-ventilated conditions
-
Do not inhale spray mist
-
Avoid skin contact; remove spillage immediately with soap and water or suitable cleanser
-
In case of eye contact, flush thoroughly with water and seek medical attention immediately
