Description
PACK SIZE
-
Quarter: 0.91 Lts.
-
Gallon: 3.65 Lts.
-
Drum: 14.6 Lts.
COLOR RANGE
-
As per the Shade Card
FILM PROPERTIES
-
Tolerates normal levels of atmospheric humidity
-
Suitable for interior and exterior environments
COMPOSITION (NOMINAL)
-
Light-fast non-lead pigments
-
Binder: Acrylic Copolymer Emulsion
-
Solvent: Water
VOLUME SOLIDS
-
White: 65% (nominal)
-
Other colours may vary
DRYING TIME
-
Touch Dry: Depends on humidity and temperature
-
Recoat: 2–3 hours
APPLICATION
-
Brush
-
Roller
THINNING
-
For sealing new or bare surfaces:
-
1 part clean water to 2 parts paint (50%)
-
-
For normal use:
-
Do not exceed 2–3 parts clean water to 4 parts paint (50–70%)
-
CLEANING UP
-
Clean all equipment with clean water immediately after use
SURFACE PREPARATION
-
Allow all new surfaces to dry completely
-
Remove loose or defective paint and powdery residues by:
-
Brushing
-
Scraping with a stiff brush
-
-
Where required:
-
Rub down using suitable abrasive paper
-
Remove all dust
-
FILLING NEW SURFACES
-
Prime new surfaces with Kings Prime Sealer (Water-Based)
-
Fill imperfections using Acrylic Wall Putty
-
Allow filler to dry overnight before painting
SYSTEM INFORMATION
-
Powdery Surfaces:
-
Primer: 1 coat
-
Putty: 1 coat
-
Finish: 2–3 coats (Economical Emulsion – Royal Sapphire)
-
-
Normal, Sound Surfaces (Previously Painted):
-
No primer required
-
SAFETY, HEALTH & ENVIRONMENT INFORMATION
-
Keep out of reach of children
-
Keep the container tightly closed and upright when not in use
-
Avoid contact with eyes and skin
-
Repeated exposure may cause skin dryness or cracking
-
Wear suitable gloves and eye protection during application
-
In case of eye contact:
-
Rinse immediately with plenty of water
-
Keep eyelids apart
-
Seek medical advice
-
-
In case of skin contact:
-
Wash with soap and water or a recognised skin cleaner
-
-
Use only in well-ventilated areas
-
Keep doors and windows fully open during application and drying
-
Wear a cartridge mask when rubbing down
-
Harmful if swallowed and may cause lung damage
-
Do not inhale vapours or sanding dust
-
Toxic by inhalation or ingestion
-
If discomfort occurs:
-
Move to fresh air immediately
-
Seek medical attention if symptoms persist
-
-
Protect from extreme temperatures
-
Store in a cool, dry place
-
Do not store by hanging on a hook
-
In case of spillage:
-
Contain and collect using sand or earth
-
-
Very toxic to aquatic organisms
-
Do not dispose of into drains or the environment
-
Follow all applicable environmental regulations
