Weather Shield

PACK SIZE

• Quarter: 0.91 Lts.

• Gallon: 3.65 Lts.

• Drum: 14.6 Lts.

COLOR RANGE

• As per the Shade Card

FILM PROPERTIES

• Tolerates normal levels of atmospheric humidity

• Suitable for interior and exterior environments

COMPOSITION (NOMINAL)

• Light-fast non-lead pigments

• Binder: Acrylic Copolymer Emulsion

• Solvent: Water

VOLUME SOLIDS

• White: 40% (nominal)

• Other colours may vary

DRYING TIME

• Touch Dry: Depends on humidity and temperature

• Recoat: 2–3 hours

PRACTICAL COVERAGE

• Approx. 150 sq. ft. per litre per coat

APPLICATION

• Brush

• Roller

THINNING

• For sealing new or bare surfaces:

  • Thin with up to 2 parts clean water to 4 parts paint (50%)

• For normal use:

  • Thinning should not exceed 2–3 parts clean water to 4 parts paint (50–70%)

CLEANING UP

• Clean all equipment with clean water immediately after use

SURFACE PREPARATION

• Allow all new surfaces to dry completely

• Remove loose or defective paint and powdery residues by:

  • Thorough brushing

  • Scraping with a stiff brush

• Where required:

  • Rub down using suitable abrasive paper

  • Remove all dust

FILLING NEW SURFACES

• Prime new surfaces with Kings Prime Sealer (Water-Based)

• Fill imperfections using Acrylic Wall Putty

• Allow filler to dry overnight before painting

SYSTEM INFORMATION

• Powdery Surfaces:

  • Primer: 1 coat

  • Putty: 2–3 coats

  • Finish: 2–3 coats (Weather Shield)

• Normal, Sound Surfaces (Previously Painted):

  • No primer required

SAFETY, HEALTH & ENVIRONMENT INFORMATION

• Keep out of reach of children

• Keep the container tightly closed and upright when not in use

• Avoid contact with eyes and skin

• Repeated exposure may cause skin dryness or cracking

• Wear suitable gloves and eye protection during application

• In case of eye contact:

  • Rinse immediately with plenty of water

  • Keep eyelids apart

  • Seek medical advice

• In case of skin contact:

  • Wash with soap and water or a recognised skin cleaner

• Use only in well-ventilated areas

• Keep doors and windows fully open during application and drying

• Wear a cartridge mask when rubbing down

• Harmful if swallowed and may cause lung damage

• Do not inhale vapours or sanding dust

• Toxic by inhalation or ingestion

• If discomfort occurs:

  • Move to fresh air immediately

  • Seek medical attention if symptoms persist

• Protect from extreme temperatures

• Store in a cool and dry place

• Do not store by hanging on a hook

• In case of spillage:

  • Contain and collect using sand or earth

• Very toxic to aquatic organisms

• Do not dispose into drains or the environment

• Follow applicable environmental regulations